XBD Single-Stage Multi-Stage Fire Pump
XBD series electric motor fire pump set is a new product developed by our company according to market needs. Its performance and technical conditions meet the requirements of the newly promulgated national GB6245-2006 “Fire Pump” standard. The product has been certified by the Fire Protection Products Conformity Assessment Center of the Ministry of Public Security and obtained the CCF fire protection certification.
The XBD series electric motor fire pump units have optimized models and more reasonable distribution, which can better adapt to the fire protection needs of different floors and pipe resistance, and meet the design selection
- Model Description
- Structure diagram
- Water pump steering
- Main component materials
Single stage electric motor fire pump unit
Represents a vertical single-stage motor fire pump unit with a rated flow of 10L/s, a rated pressure of 0.8MPa, an inlet and outlet diameter of φ 80mm, and a nominal impeller diameter of φ250mm.
New series of horizontal single-stage fire pump units
Represents a new series of horizontal single-stage fire pump units with a rated flow of 40L/s, a rated pressure of 1.4MPa, and an inlet diameter of 125mm.
The fifth generation XBD series vertical single-stage electric motor fire pump unit
Represents the fifth generation XBD series vertical single-stage fire pump unit, with a rated flow of 20L/s, a rated pressure of 1MPa, and an inlet diameter of 100mm.
Represents a horizontal multi-stage fire pump unit with a rated flow of 40L/s, a rated pressure of 0.8MPa, and an inlet diameter of 150mm.
Constant pressure (tangential) fire pump unit
Represents a horizontal constant pressure (tangential) fire pump unit with a rated flow of 40L/s and a rated pressure of 1.4MPa.
Vertical single-stage | Fifth generation XBD series vertical single-stage motor fire pump set structure diagram
Horizontal single-stage/constant voltage (tangential) electric motor fire pump set structure diagram
| Name | Material | Standard | Kind |
| Pump body, pump cover | Cast iron 250 | GB9439 | Single stage fire pump Constant pressure (tangential) fire pump |
| Ductile iron 400-18 | GB9439 | ||
| Inhalation section, discharge section, middle section | Cast iron 250 | GB9439 | Multistage fire pump |
| Ductile iron 400-18 | GB9439 | ||
| Guide vanes, brackets | Cast iron 200 | GB9439 | |
| Impeller | Stainless steel | GB3077 | All series |
| Shaft seal | Machinery Seal | DIN24960 | All series |
Motor speed: 1480/2960 r/min
Liquid temperature: ≤80°C clean water
Flow range: 5~100 L/s
Pressure range: 0.32~2.4 MPa
Maximum allowable inlet pressure: 0. 4 MPa
Flow range: 1~20L/s
Liquid temperature: ≤80°C clean water
Motor speed: 2900 r/min
Maximum allowable inlet pressure: .0.4Mpa
Pressure range: .0.3~ 2.5Mpa
YE3 series ultra-high efficiency three-phase asynchronous motor
Voltage:380V
Frequency:50Hz
Protection level: IP55
Insulation grade: F
Installation type: V1, B3 or B35
Special motors are available on request.
●Pump Pump model
Flow rate L/s
Pressure MPa
Shaft seal form: mechanical seal
Discharge flange direction
Material requirements
●Motor
Motor protection level
Insulation level
●Accessories
Connection plate
Vibration isolator (vibration isolation pad)