2BW Series Water Ring Vacuum Pump And Compressor Complete Set
The 2BW series water ring vacuum pump and compressor complete set is a complete set of products with our company’s water ring vacuum pump and compressor as the main engine. The complete set includes pump, gas-water separation heat exchanger, internal pipelines, instrument valves, and overall base. It is widely used in chemical, pharmaceutical and other industries, and is especially suitable for pumping toxic, flammable and explosive gases.
2BW Series Water Ring Vacuum Pump And Compressor Complete Set
The 2BW series water ring vacuum pump and compressor complete set is a complete set of products with our company’s water ring vacuum pump and compressor as the main engine. The complete set includes pump, gas-water separator, heat exchanger, internal pipelines, instrument valves, and overall base. It is widely used in chemical, pharmaceutical and other industries, and is especially suitable for pumping toxic, flammable and explosive gases.
- Complete Model Representation Method
- Complete Device Process Flow Chart
1. The unit is supplied in an integrated manner and has complete functions to meet the user’s requirements;
2. Integrated base facilitates on-site installation and debugging. The unit has small vibration, low noise, and safe and reliable operation;
3. Closed circulation of working fluid (water, methanol, ethylene glycol, toluene, xylene, acetone, methylene chloride, diesel, etc.) reduces pollution to the environment.
dye;
4. There are many ways to control the liquid level of the gas-water separator to meet different on-site usage requirements.
Manual control: When the unit is running, a small amount of working fluid will turn into steam and be discharged with the gas, causing the liquid level to drop. The working fluid is replenished to the unit by manually adjusting the rehydration valve.
Mechanical automatic control: The gas-water separator is equipped with a mechanical automatic water replenishment valve and a mechanical automatic drainage valve to automatically replenish or drain liquid.
Electric automatic control: The gas-water separator is equipped with a liquid level sensor, a replenishing solenoid valve and a draining solenoid valve. According to changes in the liquid level, the replenishing solenoid valve and the draining solenoid valve are automatically controlled to open or close, and the liquid level is controlled within the required range.
2BW complete sets of equipment are non-standard products and are specially designed according to the specific requirements of customers. Accessories should be selected according to the usage requirements of the working conditions, and other accessories such as separators, ejectors, condensers, etc. are also provided. Under the condition of ensuring the use of functions, the configuration should be as simple as possible to improve the reliability of unit operation.