KL/KLR Series Sump slurry pump
Type KL and KLR pumps are vertical, centrifugal slurry pumps submerged in sump to work. They are designed for delivering abraseive, large particle and high density slur- ries. These pumps have no need of any shaft seal and sealing water.They can also be operated normally for insufficient suction duties.
Wet parts of type KL pump are made of abrasion-resistant metal.
All parts of type KLR pump immersed in liquid are lined with rubber outer liner. They are suited to transport non-edge angle abrasive slurry
- Model Meaning
- Structural Drawing
- Outline Installation Drawing
- Outline Installation Table
| 1 | Shaft | 2 | Bearing |
| 3 | Bearing Housing | 4 | Bearing |
| 5 | Shim | 6 | Column |
| 7 | Discharge Pipe | 8 | Strainer |
| 9 | Back Liner | 10 | Impeller |
| 11 | Pump Casing | 12 | Lower Strainer |
| PUMP TYPE | A | B | C | D | E | F | G | H | J | K | L | M | MAXSZE INALT MOTOR | PUMP | SLURRY PUDDLE SIZE | |||||||
| N | P | Q | R | S | T | V | X | CUBACE m³ |
||||||||||||||
| kg | ||||||||||||||||||||||
| 40P-KL | 137 | 285 | 153 | 900* 1200 |
380 | 500 | 500 | 450 | 450 | 205 | 127 | 174 | 733 | 675 | 248 | 629 | 285 | 280 | 695 | 550 | 1000 | 0.34 |
| 40P-KLR | 140 | 265 | 175 | 380 | ||||||||||||||||||
| 65Q-KL | 227 | 399 | 231 | 900 1200* 1500 |
492 | 680 | 680 | 620 | 620 | 285 | 178 | 265 | 898 | 794 | 290 | 681 | 432 | 350 | 925 | 800 | 1400 | 0.90 |
| 65Q-KLR | 230 | 380 | 260 | 498 | ||||||||||||||||||
| 100R-KL | 260 | 538 | 317 | 1200 1500* 1800 |
662 | 100D | 870 | 800 | 930 | 400 | 229 | 393 | 1141 | 1020 | 416 | 960 | 867 | 350 | 1225 | 1000 | 1750 | 1.86 |
| 100R-KLR | 266 | 535 | 332 | 668 | ||||||||||||||||||
| 150S-KL | 390 | 670 | 365 | 1500 1800* 2100 |
875 | 1100 | 1100 | 1030 | 030 | 500 | 280 | 475 | 1311 | 1200 | 476 | 1011 | 1737 | 350 | 1525 | 1250 | 2150 | 3.54 |
| 150S-KLR | 395 | 670 | 400 | 883 | ||||||||||||||||||
| 200S-KL | 450 | 805 | 440 | 1500 1800* 2100 |
878 | 1300 | 1200 | 1100 | 1200 | 600 | 343 | 550 | 1313 | 1300 | 476 | 1011 | 350 | 1525 | 1500 | 2400 | 4.76 | |
| 200S-KLR | ||||||||||||||||||||||
| 250T-KL | 500 | 930 | 470 | 1800 2100* 2400 |
1000 | 1750 | 1450 | 1350 | 1650 | 700 | 406 | 685 | 1572 | 1750 | 561 | 1246 | 400 | 1775 | 1700 | 2700 | 6.68 | |
| 250T-KLR | ||||||||||||||||||||||
| 300T-KL | 500 | 1170 | 559 | 1800 2100* 2400 |
1000 | 1750 | 1450 | 1350 | 1650 | 700 | 483 | 700 | 467 | 1750 | 561 | 1246 | 400 | 1800 | 2000 | 3100 | 9.43 | |
| 300T-KLR | 400 | 1090 | 630 | 1365 | ||||||||||||||||||
KL/KLR Sump slurry pump spectrogram
Performance range of KL/KLR Sump Slurry Pump
| Type | Material | Range of Performance | ||||
| QCapacity | H(m)
Hrad H |
n
Speed n |
Max.Eff(%) | |||
| (m³/h) | (L/s) | |||||
| 40PV-KL | M | 19～43.2 | 5.4～12 | 4.5～28.5 | 1000～2200 | 40 |
| 40PV-KLR | RU | 17.3～39.6 | 4.8～11 | 4~26 | 1000~2200 | 40 |
| 65QV-KL | M | 23.4~111 | 6.5~30.8 | 5～29.5 | 700～1500 | 50 |
| 65QV-KLR | RU | 22.5～105 | 6.25～29.15 | 5.5～30.5 | 700～1500 | 51 |
| 100RV-KL | M | 54～289 | 15～80.3 | 5～35 | 500～1200 | 56 |
| 100RV-KLR | RU | 64.8～285 | 18～79.2 | 7.5～36 | 600～1200 | 62 |
| 150SV-KL | M | 108～479.2 | 30～133.1 | 8.5～40 | 500～1000 | 52 |
| 200SV-KL | M | 189～891 | 152.5~247.5 | 6.5～37 | 400～850 | 64 |
| 250TV-KL | M | 261~1089 | 72.5～302.5 | 7.5～33.5 | 400～750 | 60 |
| 300TV-KL | M | 288~1267 | 80～352 | 6.5～33 | 350~700 | 50 |
| NOTE: “M”:Wear-resistant alloy.”RU”:rubber. | ||||||