KQL Series Type Centrifugal IN-line Pump For Cooling Tower
● Utilizes a direct-drive structure, ensuring stable operation, reduced vibration and noise, and easy maintenance.
● The impeller and pump body are designed with an excellent hydraulic model, resulting in higher efficiency.
● Castings such as the pump body, pump cover, and impeller are manufactured using coated sand and precision casting processes, resulting in a smooth surface and excellent appearance and quality.
● Cast iron flow parts are fully covered with electrophoretic paint, significantly reducing the impact of corrosion on pump performance and lifespan.
KQL Series Type Centrifugal IN-line Pump For Cooling Tower
● Water circulation in closed-loop cooling towers and condensers
● Cooling of various equipment units
● General water supply
- Model Description
- Operating Conditions
- Materials
- Motors
- KQL Structure Diagram
● For example, KQL100/125-2.2/4
● KQL Standard Vertical Single-Stage Pump
● 100 Inlet/Outlet Diameter
● 125 Nominal Impeller Diameter
● 2.2/4 Motor Power/Number of Motor Poles
● Medium: Clean water
● Medium temperature: -10℃~80℃
● Ambient temperature: ≤40℃ (altitude less than 1000m, relative humidity not exceeding 95%)
● Maximum working pressure: <0.6Mpa
● Pump body and cover: Cast iron
● Impeller: 2Cr13 stainless steel
● Pump shaft: 45# steel (304 for sealing)
● Mechanical seal dynamic and static rings: Antimony-impregnated graphite, silicon carbide
● Bearings: Imported brand SKF (NSK for 4kW and below)
● Surface treatment: Electrophoretic paint
● YE3 series ultra-high efficiency three-phase asynchronous motors. Power and type conform to IEC-Norm.
● Type: V1 (KQL) B35 (KQW)
● Power Supply: 380V, 50Hz
● Protection Class: IP55
● Insulation Class: F
● Motor Shaft: 45# steel (304 for sealing) or stainless steel (2Cr13)
● Temperature: Maximum operating temperature of the motor is 40℃. Reduce power when the temperature exceeds 40℃.
● Rotation: For vertical pumps, the rotation direction is clockwise when viewed from the motor fan end downwards; for horizontal pumps, the rotation direction is counterclockwise when viewed from the pump inlet.
| No. | QUANTITY | NAME |
| 1 | 1 | Pump body |
| 2 | 1 | Impeller |
| 3 | 1 | Air release valve |
| 4 | 1 | Mechanical seal |
| 5 | 1 | Pump cover |
| 6 | 1 | Signal plate |
| 7 | 1 | Motor |
| 8 | 1 | Water baffle ring |
| 9 | 1 | Stainless steel bushing |
| 10 | 1 | Screws |
| 11 | 1 | O-rings |
| 12 | 2 | Inlet/outlet pressure test ports Rp3/8 (optional) |
| 13 | 1 | Plugs |
| 14 | 1 | Base plate |
| Flange Standard | ||||
| Inlet/outlet flange PN10-GB/T17241.6-2008 | ||||
| DN | D | K | d | nxdL |
| mm | Quantity: × mm | |||
| 65 | 185 | 145 | 108 | 4×φ18 |
| 80 | 200 | 160 | 124 | 8×φ18 |
| KQL Cooling Tower Dedicated Water Pump Installation Dimensions Table | |||||||||||
| Type | Flange dimensions | DN | l0 | m | a | l1 | b₁ | b₂ | I₂ | b | c |
| mm | |||||||||||
| KQL65/80-0.75/2 | PN10 | 65 | 345 | 170 | 100 | 390 | 85 | 191 | 325 | 125 | 185 |
| KQL80/70-1.1/2 | PN10 | 80 | 400 | 180 | 112 | 390 | 101 | 226 | 375 | 158 | 200 |
| KQL80/80-1.5/2 | PN10 | 80 | 400 | 180 | 112 | 465 | 101 | 236 | 375 | 158 | 200 |
| KQL80/80-2.2/2() | PN10 | 80 | 400 | 180 | 112 | 505 | 101 | 236 | 375 | 158 | 200 |
| Inlet/outlet flange PN10-GB/T17241.6-2008 | ||||
| DN | D | K | d | nxdL |
| mm | Quantity:x mm | |||
| 100 | 220 | 180 | 144 | 8×φ18 |
| 125 | 250 | 210 | 174 | 8×φ18 |
| 150 | 285 | 240 | 199 | 8×φ23 |
| 200 | 340 | 295 | 254 | 8×φ23 |
| Inlet/outlet flange PN6-GB/T17241.6-2008 | ||||
| DN | D | K | d | nxdL |
| mm | Quantity:x mm | |||
| 250 | 375 | 335 | 309 | 12×φ19 |
| Inlet/outlet flange PN16-GB/T17241.6-2008 | ||||
| DN | D | K | d | nxdL |
| mm | Quantity:x mm | |||
| 200 | 340 | 295 | 266 | 12×φ22 |
| KQL Cooling Tower Dedicated Water Pump Installation Dimensions Table | |||||||||||
| Type | Flange Dimensions | DN | l0 | m | a | l1 | b₁ | b₂ | f | e | d |
| mm | |||||||||||
| KQL100/125-2.2/4 | PN10 | 100 | 560 | 280 | 170 | 570 | 150 | 340 | 240 | 200 | 18 |
| KQL125/125-314(I)A | PN10 | 125 | 570 | 280 | 170 | 550 | 155 | 355 | 240 | 200 | 18 |
| KQL125/125-4/4(I) | PN10 | 125 | 570 | 280 | 170 | 560 | 155 | 355 | 240 | 200 | 18 |
| KQL150/160-5.5/4 | PN10 | 150 | 690 | 320 | 200 | 580 | 188 | 435 | 240 | 200 | 18 |
| KQL150/125-5.5/4 | PN10 | 150 | 730 | 360 | 200 | 580 | 185 | 415 | 300 | 260 | 18 |
| KQL150/125-7.514(1) | PN10 | 150 | 730 | 360 | 200 | 625 | 185 | 415 | 300 | 260 | 18 |
| KQL200/160A-11/4 | PN10 | 200 | 920 | 450 | 322 | 740 | 228 | 520 | 400 | 360 | 18 |
| KQL200/200A-15/4 | PN10 | 200 | 920 | 450 | 322 | 770 | 228 | 520 | 400 | 360 | 18 |
| KQL250/200A-22/4 | PN6 | 250 | 950 | 450 | 322 | 900 | 240 | 565 | 400 | 360 | 18 |
| KQL200/160A-11/4 | PN16 | 200 | 900 | 400 | 312 | 750 | 215 | 490 | 450 | 400 | 22 |